Your Cart is Empty
Let's Get Started!
Step 1: Unbuckle the cover and remove the main body
Step 2: Assemble the two seats
Step 3: Remove the gunwale cap and unfold the canoe
Step 4: Unfold both the bow and stern of the canoe
Step 5: Bend the fold line next to the seat holder so that it goes inward
Tip: When you release the buckle, it naturally folds, but please be sure to check
Step 6: Fasten the buckle of the central webbing and pull it all the way
Step 7: Unfold the folded lines on the bow (stern)–press the upper part first to unfold it, then press the lower part to unfold it
Step 8: Unbuckle the center webbing and unfold the fold lines
Tip: If you raise and lower the bow (stern), the folded line will unfold
Step 9: Insert the gunwale cap
Tip: Insert the (1) type gunwale cap first, then the (2) type
Tip: Straighten the folded part of the gunwale by hand and insert the gunwale cap
Step 10: Place the floorboard in the canoe
Tip: Match the correct MYCANOE logo on the floorboard and bottom of the canoe
Step 11: Assemble the pads on the seats
Step 12: Place the seats in the canoe
Tip: Insert the pins on both sides of the seat into the holes of the canoe holder, then slide the seat in the "LOCK" direction to lock it
Tip: The paddles printed on the seat and canoe must have the same color and orientation (Bow: black color, Stern: white color)
Step 13: Fasten all buckles on the canoe
You're Done!
Step 1: Unfasten all buckles on the canoe
Step 2: Separate the seats from the canoe
Tip: Pull the holder outward and slide the seat in the "UNLOCK" direction to remove it
Step 3: Release the sets, remove the seat pads and store it separately
Tip: To reduce the size of the seat, it is better to fold it once in reverse and then unfold it to flatten it
Step 4: Remove the floorboard from the canoe
Step 5: Remove the gunwale cap
Step 6: Press and fold the fold line on the side of the canoe into two places
Tip: Since it's intended to be pressed from above, simply fold the two-fold lines–be sure to bend it because otherwise the canoe will be damaged and the next step will be difficult
Step 7: Press the point where the lines on the bow (stern) side intersect and fold it inwards
Tip: Fold the other side in the opposite direction and press it to bed
Step 8: Raise the bow (stern) up to the second line and bend the first line in the opposite direction
Tip: Bend both sides of the bow (stern) in the same way
Step 9: Pull out either the bow or stern to make space and insert the other side there
Step 10: To insert the gunwale cap, tighten the webbing slightly loosely and insert four gunwale caps on each side
Step 11: Place one seat on the floorboard, then place the main body and another seat in turn and fasten the buckles
Tip: The upside of the floorboard is the part with the shoulder straps–place the seat on the downside and insert the pads into the empty space of the canoe
You're Done!
We are dedicated to helping you get on the water easily. Send us a message and we'll get back to you ASAP.
